Molding garments are very much a serious issue to garments buyers, garments manufacturers are asked to bear for compensation for molding garments. This writing is about moisture and its effect on garments.
 |
| Moisture Checking on Garments |
Moisture effect on Garments
 |
| Moisture Meter |
Controlling Garments from being affected by moisture
- All production floors must be kept clean and dry
- Use dehumidifier dry Room, air ventilation.
- Humidity maximum reading should be less than 55-60% in the Garments production floor, especially in-store and packing areas.
- Checking humidity and taking corrective action
- Arrange mold remediation system through a chemical spray.
- Can be used anti-mold sticker inside of Garments carton.
 |
| Taking Meter reading |
Garments moisture needs to check before packing. The moisture level should be below 8% before packing. Moisture should be checked on the Garments and Carton.